ACCELERATED CURING TEST OF CONCRETE (IS:9013-1978)
|Objective
Normally, the strength of concrete is found out after 7 days and 28 days. For some construction activities, it may be too late and need to know the strength earlier.
ReferenceStandards
IS: 9013-1978-Method of making, curing and determining compressive strength of accelerated cured concrete test specimen.
Equipment & Apparatus
- Accelerated curing tank
- Compression Testing Machine
Procedure
- Prepare the specimen and store it in moist air of at least 90% relative humidity and at a temperature of 27+2oC for 23 hrs + 15 minutes.
- Lower the specimen, into a curing tank with water at 1000C和完全保持永远sed for 3 ½ hours + 5 minutes
- The temperature of water shall not drop more than 3oC after the specimens are placed and should return to boiling within 15 minutes.
- After curing for 3 ½ hours + 5 minutes in the curing tank, the specimen shall be removed from the moulds and cooled by immersing in cooling water 27+2oC for a period of at least one hour.
- Read my postcompressive strength test of concretefor further steps.
Calculation
The corresponding strength at 28 days can be found out from the following correlation. (It is however suggested that a new specific correlation should be developed for the specific concrete used at site.)
R28(Strength at 28 days) = 8.09 + 1.64 Ra
Where,
Ra = Accelerated Curing Strength in MPa.
Safety & Precautions
- Use hand gloves, safety shoes, while removing containers from curing tank after switching off the curing tank & place sample in machine properly.
- Equipment should be cleaned thoroughly before testing & after testing.
7 Comments
Requirement: 400 degree Celsius Heating capacity Curing tank.
Awaiting for quotation
Kindly do the needful.
What is 8.09 in ACT method checking?
Can you cure in this apparatus using 1N NaOH as the curing medium.
422/22500=18.75
ippo epti act calculate panna?
You are wrong sir
Plz. IS code 9013 stady clause 5.3
what is target strength for accelerated curig test.
Thanks for sharing your knowledge.
This must b be very fruitful for all engineers..