4 DIFFERENT TYPES OF LIMES USED IN CONSTRUCTION
|酸橙的类型
Different types of limes are used for building construction. It is not generally found in the free state. Lime is a product which is obtained by burning lime stone, a raw material, found in lime stone hills or lime stone boulders in the beds of old river, kankar found below ground level, or shells of sea animals.
Uses of Building Lime
Lime in building industry is used for various purposes such as
- 用于建筑基础和填充的石灰混凝土矩阵,不需要早期设置,
- For preparing mortar for bedding bricks and stones in masonry works,
- 作为覆盖墙壁和指向保存接头的胶合物中的胶合材料,以及
- For white washing and colour washing.
4 Types of Limes
1.Quick lime
It is also known as caustic lime. It is obtained by calcination (i.e. heating to redness) of comparatively pure lime stone. It is amorphous in nature, highly caustic and possesses great affinity to moisture.
2.Slaked lime
It is also known as hydrate of lime. It is obtained by slaking (i.e. chemical combination of quick lime with water) of quick lime. It is ordinary pure lime, in white powder form, available in market. It has got the tendency of absorbing carbonic acid from the atmosphere in presence of water.
3.Fat lime
It is also known as high calcium lime or pure lime or rich lime or white lime. It is popularly known as fat lime as it slakes vigorously and its volume is increased to about 2 to 2.5 times that of quick lime. This lime is used for various purposes as white washing, plastering of walls, as lime mortar with sand for pointing in masonry work, as a lime mortar with surkhi for thick masonry walls, foundations, etc.
4.Hydraulic lime
It is also known as water lime. This lime contains clay and some amount of ferrous oxide. It sets under water and hence also known as water lime. Depending upon the percentage of clay IS has divided hydraulic lime in three classes namely:
- A级 - 液压液体
- Class B – Semi Hydraulic
- C类——不n-hydraulic (or Fat lime)
A级 - 液压液体
该石灰含有约25%的粘土含量,并在一天新利18体育官网登录左右的果蝇中容易地设置。这款石灰难以释放。由该石灰制备的砂浆和石灰混凝土对于在水下或潮湿地点的施工非常有用。
Class B – Semi Hydraulic
Semi-hydraulic lime contains about 15% clay content and sets under water at a slower rate within a week or so. The mortar and concrete prepared from this lime is strong and used for superior type of masonry work.
C类——不n-hydraulic (or Fat lime)
This lime contains about 7.5% of clay content and is prepared from pure lime stone. This slakes vigorously within few minutes but does not set under water. This is used for white washing and colour washing.
Also Read:Setting Time Test of Building Lime
Sir
I like to know detail on lime slaking process ob quik and hydraullic.
Regards
How to use limestone power in contruction. Which method for this with cement. It’s good or bad.
如何使用石灰石力量进行标识。哪种方法用水泥使用。请提出好坏
Kruahna Shinde 7722035599
Pune Maharashtra
Galling house has adrInagepipe running in the wall an it was leaking. I have removed the pipe and someone said I could fill the empty hole with lime to suck in any moisture on the wall. Is thAt ok. Which type of lime?
civil Engineering related topics…