如何使用细度模量值混合聚合?
|有时它可能发生在,站点上可用的聚合不符合所需的分级。在这种情况下,可以组合来自不同源的两个或更多个聚合以获得所需的分级。
细度模量值可用作与细聚集体混合粗骨料以产生所需分级的技术方法。按照下面所示的步骤使用细度模量值混合聚集体。
使用细度模数值进行混合聚集体的步骤指南
第1步(计算细骨料的细度模量)
- 使用从80mm至150微米的筛网筛分细聚集体。
- 计算每个筛子上保留骨料的累积百分比。
- 在每个筛子上添加保留百分比的所有值。
- Divide the sum, calculated as above, by 100. This gives the fineness modulus value of fine aggregate. Let it beF1。
第2步(计算粗骨料的细度模量)
- 使用从80mm至150微米的筛网筛分粗骨料。
- 计算每个筛子上保留骨料的累积百分比。
- 在每个筛子上添加保留百分比的所有值。
- Divide the sum, calculated as above, by 100. This gives the fineness modulus value of fine aggregate. Let it beF2。
步骤3.(Calculate Fineness Modulus of Combined Aggregate)
- 现在来自指定的分级要求,计算组合聚集体的细度模量值。
- 如果指定的等级限制在百分比age of passing, then subtract each of percentage of passing value from 100. This will give you the percentage of retained on each sieve.
- 在每个筛子上添加保留百分比的所有值。
- Divide the sum, calculated as above, by 100. This gives the fineness modulus value of fine aggregate. Let it beF。
第四步(计算细骨料与粗骨料的比率)
- 让 ”X“是与粗骨料组合的细骨料的百分比。X可以使用下面给出的公式来计算。
x = [(f2-f)/(f-f1的)]*100
在哪里,
F1=细骨料的细度模量值
F2= Fineness modulus value of coarse aggregate
F=组合骨料的细度模量值
After finding the percentage of fine aggregate to be combined with the coarse aggregate by the above formula, their proportion can be calculated.
解决了例子
计算精细骨料的细度模量值(f1的)
筛尺寸(mm) | Weight Retained (g) | 保留累积重量(g) | Cumulative percentage of weight retained (%) |
80 | 0. | 0. | 0. |
40 | 0. | 0. | 0. |
20. | 0. | 0. | 0. |
10. | 0. | 0. | 0. |
4.75 | 10. | 10. | 2 |
2.36 | 50. | 60. | 12. |
1.18 | 50. | 110. | 22. |
0.600 | 95. | 205. | 41. |
0.300 | 175. | 380. | 76. |
0.150 | 85. | 4.6.5. | 93. |
<0.150. | 35 | 500. | |
Total | 500克 | 总= 246. |
因此精细聚集体的细度模量值(F1的)= 246/100 = 2.46
计算粗骨料的细度模量值(F.2的)
筛尺寸(mm) | 重量保留(kg) | 保留累积重量(kg) | Cumulative percentage of weight retained (%) |
80 | 0. | 0. | 0. |
40 | 0. | 0. | 0. |
20. | 6. | 6. | 40 |
10. | 5. | 11. | 73.3. |
4.75 | 4. | 15. | 10.0. |
2.36 | - | 10.0. | |
1.18 | - | 10.0. | |
0.600 | - | 10.0. | |
0.300 | - | 10.0. | |
0.150 | - | 10.0. | |
<0.150. | - | 10.0. | |
Total | 15千克 | 总= 713.3. |
因此粗骨料的细度模量值(F2)= 713.3 / 100 = 7.133
计算合并骨料(F)的细度模量值
筛尺寸(mm) | Percentage of passing (%) | 保留的百分比(%) |
80 | 10.0. | 0. |
40 | 10.0. | 0. |
20. | 98. | 2 |
10. | 61. | 39. |
4.75 | 42. | 58. |
2.36 | 35 | 65. |
1.18 | 28. | 72. |
0.600 | 22. | 78. |
0.300 | 5. | 95. |
0.150 | 0. | 10.0. |
<0.150. | 0. | |
总= 509. |
因此合并骨料的细度模量值(F的)= 509/100 = 5.09
计算细骨料的比例与粗骨料
与粗骨料合并的细骨料的百分比(即X) 是
= [(7.133-5.09)/(5.09-2.46)]*100
= (2.04/2.63)*100
= 77%
这意味着对于每100公斤的粗骨料,我们需要混合77千克的细骨料,以获得组合聚合的指定分级。
了解更多新利18体育官网登录骨料的细度模量点击这里。
3评论
你是如何提出综合细度模量的结果?我不能跟随它..
评分的要求按标准要求。在组合两个聚合类型后,您的工作是达到这种评分要求。
If you don’t mind, can i ask what exact value did you use? I’m so eager to learn it. Thanks.